Print this pagePrint this page

Brick Acid

Brick Acid PrictureThe industrial-strength brick acid supplied by ReAgent is stronger and more effective than alternative products available on the high street. Carriage prices vary depending on your location. We can also supply in bulk - up to 1000L IBC's.
BRICK ACID - STANDARD STRENGTH

Product Code Pack Size Price (£)
BRAC-2495-235L 10.00
BRAC-2495-2925L31.00
   
BRICK ACID - HIGH STRENGTH
Product Code Pack Size Price (£)
BRAC-2496-235L 10.00
BRAC-2496-2925L31.00

For a full quotation including carriage please:

Contact Us

IMPORTANT INFORMATION

  • Please note our High Strength Brick Acid is not necesserily a superior product, it depends entirely on your application, please contact us to discuss your requirement

  • We recommend diluting both the regular and high strength products. This decreases the likelihood of damaging brick, it will make the product go further (reducing the cost) and a dilute material is safer to handle than a concentrated one. Initially, try 2 parts water to 1 part acid, then 1 to 1, then 2 parts acid to 1 part water. Only move on to applying the concentrate after you have tried these dilutions.

  • Dampen the area you wish to clean with water then apply a diluted mixture as above. Scrub this into the brick with a hard bristled, non metallic brush then rinse thoroughly.

  • Do not handle this product with anything metallic - brushes, buckets etc.

  • Always test this product on a small area first

  • Please take time to read the Material Safety Data Sheet on this product thoroughly before using. These can be found here:


Our brick acid is very effective at dissolving concrete residues and we have many satisfied customers who have used our industrial strength brick acid. We use a strongly acidic solution which is colourless to slight yellow in colour. Please be aware this product gives off an acrid odour and is hazardous for both transport and handling purposes.

Like all our products, our brick acid is labelled, packaged and transported in line with all relevant legal requirements. Our products are also labelled, packaged and transported in line with our own Quality Management System and ReAgent is accredited to ISO 9001:2000.

When using our industrial strength brick acid, ReAgent recommends the use of all necessary Personal Protective Equipment as described on the material safety data sheet for this product, including suitable eye protection and suitable clothing including gloves. Do not mix alkaline substances or solutions with strong acids such as brick acid. This product is not intended for consumption. Due to the industrial strength of the product is should be stored in a suitable manner, away from environmental hazards. Keep this product away from children.

Established in 1977, we have been supplying high quality chemical products over 30 years. During this time we have developed a huge amount of product knowledge, the result of which enables us to supply superior products. For further information about our products and services please explore our website or contact us.



Enquiry Form

Accreditation to ISO 9001:2000 for the manufacture and
supply of reagents
and standards.
100% technical
support
before,
during and
after purchase.
Flexible Pack Sizes
let us know
what you require