Print this pagePrint this page

Water Deionised

Deionised Water 1000L IBC Image
Water Deionised - Typical Analysis
H2OM.W. 18.01
pH
5-8
Conductivity<1μs/cm*
Silica as SiO2<0.01 mg/L
Calcium & Magnesium
(as Ca + Mg)
<0.05 mg/L
Chloride as Cl
<1.0 mg/L
Residue on Evaporation
<2mg/L
Nitrate
<2ppm
Heavy Metals (Pb)
<0.1ppm

*CO2 absorbed from the atmosphere once produced can increase conductivity very slightly

Product Code
Pack Size
Price (£)
WADE-1114-20 1L 5.53
WADE-1114-23
5L
14.96
WADE-1114-2925L
43.65
WADE-1114-321000L250.00

PRICES INCLUDE NON-RETURNABLE CONTAINERS

Contact Us
for further information

CARRIAGE DEPENDS ON LOCATION / QUANTITY OF PRODUCT

Synonyms include Deionized Water, Deionised Aqua, Deionized Aqua, Deionised H2O, Deionized H2O, Water Deionised, Water Deionized, Aqua Deionised, Aqua Deionized, H2O Deionised and H2O Deionized

At ReAgent, we can supply numerous grades of water. To ensure quality, samples of our water are sent for third-party microbiology testing on a weekly basis, whilst regular chemical testing is carried out in-house. All of our water is supplied according to our ISO 9001:2000 accredited systems. The following description gives detail on our processes for manufacturing these.

Mains water enters our building. The first phase of the purification process is an Organic Trap, where a special resin removes most of the organic matter. Next, the water passes through a Twin-Bed Deionizer, where one Anionic tank removes the Cat Ions, the other Cationic Tank removes the An Ions. By now, the maximum level of impurities in the water is 10 µ per cm, however it is typically much lower – around 1µ per cm. At this point, the water is deionised.

To further reduce impurities, the water is then passed through a Mixed Bed Resin, where impurities are reduced to > 0.05 µ per cm. Water is given Ultra Violet Treatment, during which phase the water is passed through a strong UV Light to kill any remaining micro-organisms. Finally, the water moves through a 0.2 micron filter. After the final stage, the water is Ultra Pure, to such an extent that it conforms to requirements of European Pharmacopoeia.

At ReAgent, we do not use any untreated water for any of our products, or to put it another way, Deionised Water is the lowest quality water which we will use. Ultra Pure water for many of the solutions we manufacture, including pharmaceutical grade products. Please note, we do not recommend the use of treated water for human consumption; all of the beneficial properties (minerals, ions etc.) have been removed, plus it has virtually no taste to it.

We can supply in pack sizes ranging from 1L to 1000L. To enquire about price and availability of our various grades of water please contact us using the form below.



Enquiry Form

Accreditation to ISO 9001:2000 for the manufacture and
supply of reagents
and standards.
100% technical
support
before,
during and
after purchase.
Flexible Pack Sizes
let us know
what you require




Previous page: Toluene LRG