Since ReAgent began trading in 1977 , we’ve always had problems with lighting in one of our factory units. This problem has never cause any major issues, but has always been noticeable to say the least. Anybody walking through the factory would notice the difference in brightness between the three units we own. So it was about time that we had new lighting installed to brighten up the place and make the area slightly more comfortable for our workers.
Whilst the lighting in the factory has never caused any issues with our staff or any other workers, we always felt that at some point we would need to replace the lighting. It’s not until recently we noticed that some of the tubes in the lights had started to die out, so we took the opportunity to completely replace all of the lighting and improve the experience in the factory in one big swoop.
As you all know, we’re very keen on our video production and photography capabilities here at ReAgent, which speaks tonnes when you consider there aren’t many pictures or videos recorded in the middle unit. This is purely down to the fact that the lighting has never been adequate for filming. You can see from the picture below just how much dull the factory unit used to look.
New Lighting has Made a Huge Difference
The new lighting was installed within the previous week, and with work still being completed on the lights, it’s clear that there is still improvement to come. But for now, we can already see a massive improvement to the environment in the unit. You can see from the pictures below just how much of a difference the lighting has made.
Our next steps are to get improved lighting across the other units we operate in, but this is not an emergency procedure and will take place over the upcoming 12 months. Stay tuned!
All content published on the ReAgent.co.uk blog is for information only. The blog, its authors, and affiliates cannot be held responsible for any accident, injury or damage caused in part or directly from using the information provided. Additionally, we do not recommend using any chemical without reading the Material Safety Data Sheet (MSDS), which can be obtained from the manufacturer. You should also follow any safety advice and precautions listed on the product label. If you have health and safety related questions, visit HSE.gov.uk.